Measuring surface energy – The starting point for plasma pretreatment

Every material surface has a specific surface energy. Every liquid (such as ink) also has an inherent tension. Reliable adhesion with long-term stability of printinggluing or coating requires that the surface energy of the material is greater than that of the liquid. Plastics, for example, have predominantly low surface energy (often less than 28 mN/m). If these plastics are to be printed, a surface energy of 40 mN/m for solvent inks or a surface energy of 56 mN/m for UV-curing systems is required. If water-based paint systems are used, the surface energy has to be above 72 mN/m.

For many industrial applications it is crucial that adhesives and/or printing inks and surface properties are optimally aligned. Targeted pretreatment with atmospheric-pressure plasma achieves a significant increase in surface tension. This gives materials the optimum capabilities for accepting printing ink (wettability) or adhesion.

Comparison surface energy - before and after plasma treatment

Plasmatreat offers different possibilities and services to measure the surface energy of your material

Book your individual material test

Give it a try: Our experienced application engineers are looking forward working with you to find the best solution for your use case. In our well-equipped laboratories, together we will pre-treat your individual parts with our plasma technology and analyse the results.

Plasmatreat test systems and plasma systems to rent

We offer our customers the option of testing our Openair-Plasma® surface technology, with no commitment and very little expense, under the real conditions you face, directly in your own production facilities.

Contact angle measurement

For years, in close cooperation with our partner KRÜSS, we have been relying on the accuracy of the contact angle measuring method.

Test inks – Order your set here!

You can choose from among ethanol test inks, formamide test inks, and methanol test inks, each available in two Dyne sizes and as practical kits in carrying cases.

AntiCorr® Test Fluids

In less than 60 seconds, this pioneering approach assesses corrosion by applying copper sulfate - a highly acidic and corrosive liquid - as a droplet to the surface.

Discuss your challenges with our Plasma experts face to face at this events:

Trade Fair
17. - 19. Jun 2024

hy-fcell Canada

hy-fcell is where the hydrogen and fuel cell community meets to discuss technological advances, transfer knowledge and tap into international markets.

254 Commercial Street, Suite 245

Portland, ME 04101

USA

Trade Fair
18. - 20. Jun 2024

The Battery Show Europe

Discover Advanced Battery and Electric Vehicle Technologies and Innovations

Hall 8, Booth C10

 

Messe Stuttgart

Stuttgart

Germany

Trade Fair
26. - 26. Jun 2024

Adhesive Bonding Colloquium Ulm

Technische Hochschule Ulm

Prittwitzstraße 10

89075 Ulm

Germany